Installation requirements for electro-hydraulic slurry valve

Electro hydraulic slurry valveIt has a wide range of applications, especially in industries such as water conservancy, electricity, chemical engineering, metallurgy, etc. It has the characteristics of compact structure, easy operation, good sealing performance, and long service life. The ability of the electro-hydraulic slurry valve to exhibit these characteristics and performance is closely related to its correct installation. This article will introduce the installation requirements of the electro-hydraulic slurry valve.

Installation requirements for electro-hydraulic slurry valve:

1、 Environmental requirements

Firstly, the environment for installing the electro-hydraulic slurry valve should be kept dry and ventilated, and the valve should be kept away from high temperature sources and corrosive gases to prevent damage and aging of the valve.

2、 Pre installation inspection

Before installation, it is necessary to check whether the model and specifications of the valve meet the design requirements, whether the various components of the valve are intact, whether the sealing surface of the valve is flat, and whether the operating mechanism of the valve is flexible and reliable.

3、 Installation direction

The installation direction of the electro-hydraulic slurry valve should be determined according to the fluid flow direction. Normally, the inlet of the valve should face the direction of fluid flow.

4、 Interface connection

The interface of the valve should be tightly connected to the pipeline, and there should be no air or liquid leakage. When connecting, excessive force should be avoided as much as possible to avoid damaging the valve.

5、 Power connection

The power supply of the electro-hydraulic slurry valve should be connected to the designated power supply, and the voltage and frequency of the power supply should meet the requirements of the valve. When connecting the power supply, attention should be paid to the wiring sequence of the valve, as incorrect wiring may cause the valve to malfunction.

6、 Trial operation

After installation, a trial run should be conducted to check whether the valve opens and closes normally, whether there is any air or liquid leakage, and whether the valve operates flexibly.